Missing raid confimation button and DIP switches...

Support and Discussion for HF2-SU3S2 ProBox - For PC Users

Missing raid confimation button and DIP switches...

Postby RobertClark4777 » January 23rd, 2018, 7:26 pm

Okay, this my first go at setting up the HF2-SU32 ProBox. I have four WD 4TB Red drives. The quick start guides show a push button on the back, as well as some images, show two DIP switches. All I have is an empty blank plate on the back. Where can I find the proper instructions to get my drive up and going?
RobertClark4777
 
Posts: 4
Joined: January 23rd, 2018, 7:07 pm

Re: Missing raid confimation button and DIP switches...

Postby RobertClark4777 » January 23rd, 2018, 8:05 pm

Okay, I think I've figured out that ProBox is just simply a multi-drive enclosure and what I wanted was the ProRaid. I wish I hadn't relied on the model number as the ProBox and ProRAID use the same one.
RobertClark4777
 
Posts: 4
Joined: January 23rd, 2018, 7:07 pm


Return to HF2-SU3S2 ProBox - For PC Users

Who is online

Users browsing this forum: No registered users and 1 guest

cron