Probox switches from USB to SATA

Support and Discussion for HF2-SU3S2 ProBox - For PC Users
Post Reply
atkinsm1
Posts: 2
Joined: July 12th, 2016, 4:57 pm

Probox switches from USB to SATA

Post by atkinsm1 »

Hi - For the past 2-3 weeks my Probox switches from the USB connection to SATA for no obvious reason, and so unmounts from my Mac. I only have one cable (USB) connecting it to my Mac so don't know why this keeps happening but as you can imagine it is deeply infuriating. I can switch back to USB using the appropriate button on the box and the disks then re-mount but I would like to understand what is causing this to happen. Any suggestions?

Thanks

Admin_Mediasonic
Site Admin
Posts: 1808
Joined: January 28th, 2010, 2:29 pm

Re: Probox switches from USB to SATA

Post by Admin_Mediasonic »

that is odd, have never seen this happen before
what is the serial# on your enclosure?

please email us
rma_east (AT)mediasonic.ca

atkinsm1
Posts: 2
Joined: July 12th, 2016, 4:57 pm

Re: Probox switches from USB to SATA

Post by atkinsm1 »

Hi - s/no is JUL 1400822. It seems to happen after around 1hr - I have to use the interface button to switch it back to USB. When I switch it off and back on again, it defaults to SATA.

Admin_Mediasonic
Site Admin
Posts: 1808
Joined: January 28th, 2010, 2:29 pm

Re: Probox switches from USB to SATA

Post by Admin_Mediasonic »

atkinsm1 wrote:Hi - s/no is JUL 1400822. It seems to happen after around 1hr - I have to use the interface button to switch it back to USB. When I switch it off and back on again, it defaults to SATA.
please email us
rma_east (AT)mediasonic.ca

so that we can check firmware

Post Reply

Return to “HF2-SU3S2 Probox - For Mac Users”