How to move set of Raid drives from old unit to New unit

Support and Discussion for HFR2-SU3S2 ProRaid - For PC Users

How to move set of Raid drives from old unit to New unit

Postby Admin_Mediasonic » March 9th, 2011, 3:00 pm

For model HFR2-SU3S2 Raid enclosure

In the event that the unit dies or becomes defective. When you get or buy a replacement (same model). Here is the proper way to put the Old set of RAID Hard Drives back to the New unit.

1. Connect the new unit to a computer WITHOUT any hard drive in it.
2. Turn the unit on and set the same Raid mode as you had before. And press on he Raid confirmation button, until unit turns off
3. Turn the unit ON, WITHOUT any hard drive in it.
4. Put in the old set of Raid Hard drive in the new unit in the same order as you had before. (While unit is ON from step 3)
5. Wait for the unit to recognize the old Raid setting
Admin_Mediasonic
Site Admin
 
Posts: 1750
Joined: January 28th, 2010, 3:29 pm

Return to HFR2-SU3S2 ProRaid - For PC Users

Who is online

Users browsing this forum: No registered users and 1 guest