Seagate 6TB Drives not working

Support and Discussion for HFR2-SU3S2 ProRaid - For PC Users

Seagate 6TB Drives not working

Postby lazergeek » August 23rd, 2017, 4:55 pm

I have a Seagate ST6000NM004 6TB Drive that is not working with the enclosure

When setting up as a Raid 0 Span with 3 other 2TB Drives the xH light stays lit after Raid Config and the bay with the 6TB light stays constantly lit.

I changed to Single mode and it sees all 3 of my other discs just fine in disk managment, however the TB drive does not show and bay light is still constant.

If I remove all other drives except the 6TB in single mode the xH Light stays constant.

I also have of the 6TB drives and it also produces the same result. They also both work fine on another USB enclosure.

Please let me know what needs to be done to make this work, I have also emailed support.
lazergeek
 
Posts: 1
Joined: August 23rd, 2017, 12:00 am

Re: Seagate 6TB Drives not working

Postby Admin_Mediasonic » August 30th, 2017, 1:05 pm

Hi,
Enterprise Capacity 3.5 HDD SATA 4KN 6TB Hard Drive
ST6000NM0004

http://www.seagate.com/www-content/prod ... 1410us.pdf

is a 4Kn Native drive

HFR2-SU3S2 does not support 4Kn Drives.

currently only the 2 bay Dock HUD1-SU3 supports 4Kn drives
Admin_Mediasonic
Site Admin
 
Posts: 1755
Joined: January 28th, 2010, 3:29 pm


Return to HFR2-SU3S2 ProRaid - For PC Users

Who is online

Users browsing this forum: No registered users and 2 guests

cron