Page 1 of 1

Seagate 6TB Drives not working

PostPosted: August 23rd, 2017, 4:55 pm
by lazergeek
I have a Seagate ST6000NM004 6TB Drive that is not working with the enclosure

When setting up as a Raid 0 Span with 3 other 2TB Drives the xH light stays lit after Raid Config and the bay with the 6TB light stays constantly lit.

I changed to Single mode and it sees all 3 of my other discs just fine in disk managment, however the TB drive does not show and bay light is still constant.

If I remove all other drives except the 6TB in single mode the xH Light stays constant.

I also have of the 6TB drives and it also produces the same result. They also both work fine on another USB enclosure.

Please let me know what needs to be done to make this work, I have also emailed support.

Re: Seagate 6TB Drives not working

PostPosted: August 30th, 2017, 1:05 pm
by Admin_Mediasonic
Enterprise Capacity 3.5 HDD SATA 4KN 6TB Hard Drive
ST6000NM0004 ... 1410us.pdf

is a 4Kn Native drive

HFR2-SU3S2 does not support 4Kn Drives.

currently only the 2 bay Dock HUD1-SU3 supports 4Kn drives