Moving Raid Array to new enclosure

Support and Discussion for HFR2-SU3S2 ProRaid - For PC Users

Moving Raid Array to new enclosure

Postby Gabeg » May 16th, 2019, 12:41 pm

Can I move a raid3 array from the HFR2-SU3S2 to a HFR7-SU3S2?
Gabeg
 
Posts: 1
Joined: May 12th, 2019, 1:02 pm

Re: Moving Raid Array to new enclosure

Postby Admin_Mediasonic » May 23rd, 2019, 7:43 pm

As long as the Raid 3 is currently accessible and it is not Raid array corruption
but you need to set up HFR7 with these steps

1. Connect the new unit to a computer WITHOUT any hard drive in it.
2. Turn the unit on and set the same Raid mode as you had before. And press on the Raid confirmation button, until unit turns off
3. Turn the unit ON, WITHOUT any hard drive in it. (important) verify raid was set correctly.
4. Put in the old set of Raid Hard drive in the new unit in the same order as you had before. (While unit is ON from step 3)
5. Wait for the unit to recognize the old Raid setting
Admin_Mediasonic
Site Admin
 
Posts: 1792
Joined: January 28th, 2010, 3:29 pm


Return to HFR2-SU3S2 ProRaid - For PC Users

Who is online

Users browsing this forum: No registered users and 2 guests