Moving Raid Array to new enclosure

Support and Discussion for HFR2-SU3S2 ProRaid - For PC Users
Post Reply
Gabeg
Posts: 1
Joined: May 12th, 2019, 1:02 pm

Moving Raid Array to new enclosure

Post by Gabeg »

Can I move a raid3 array from the HFR2-SU3S2 to a HFR7-SU3S2?

Admin_Mediasonic
Site Admin
Posts: 1807
Joined: January 28th, 2010, 2:29 pm

Re: Moving Raid Array to new enclosure

Post by Admin_Mediasonic »

As long as the Raid 3 is currently accessible and it is not Raid array corruption
but you need to set up HFR7 with these steps

1. Connect the new unit to a computer WITHOUT any hard drive in it.
2. Turn the unit on and set the same Raid mode as you had before. And press on the Raid confirmation button, until unit turns off
3. Turn the unit ON, WITHOUT any hard drive in it. (important) verify raid was set correctly.
4. Put in the old set of Raid Hard drive in the new unit in the same order as you had before. (While unit is ON from step 3)
5. Wait for the unit to recognize the old Raid setting

Post Reply

Return to “HFR2-SU3S2 ProRaid - For PC Users”