HFR2-SU3S2FW,Raid 0/1/3/5/10, USB 3.0,eSata,Firewire 400/800

Support and Discussion for HFR2-SU3S2 ProRaid - For PC Users

HFR2-SU3S2FW,Raid 0/1/3/5/10, USB 3.0,eSata,Firewire 400/800

Postby Admin_Mediasonic » December 30th, 2010, 6:02 pm

Mediasonic HFR2-SU3S2FW, Raid 0/1/3/5/10, USB 3.0, eSata, firewire 400 & 800

HFR2-SU3S2FW.jpg
HFR2-SU3S2FW.jpg (61.98 KiB) Viewed 10200 times
Admin_Mediasonic
Site Admin
 
Posts: 1755
Joined: January 28th, 2010, 3:29 pm

Set up Info

Postby Admin_Mediasonic » September 5th, 2011, 2:00 am

After you installed the hard drives

Make sure 4 Bay is connected to a computer that is turned on
Power on the device and press Mode button on the front of the unit for 3 seconds until LED flashes. Press it again to select the RAID mode you want then press the Confirmation button on the back panel until the device shuts down. Power on the device again and the RAID mode set-up is completed.
Admin_Mediasonic
Site Admin
 
Posts: 1755
Joined: January 28th, 2010, 3:29 pm


Return to HFR2-SU3S2 ProRaid - For Mac Users

Who is online

Users browsing this forum: No registered users and 1 guest