HFR2-SU3S2FW ProRaid 4 Bay - ERROR

Support and Discussion for HFR2-SU3S2 ProRaid - For PC Users

HFR2-SU3S2FW ProRaid 4 Bay - ERROR

Postby JCReifenberg » August 27th, 2015, 12:02 pm

Hi,
I have the HFR2-SU3S2FW ProRaid 4 Bay. Yesterday when I turned on the unit I got the H error. None of the LEDs next to the drives are lit up. The drive will not mount on OS X using USB or Firewire. I have 4 Seagate 3TB drives in the unit as RAID5. Does anyone have any suggestions as to how to get my drive to mount so I can back it up? Or how to check which HDD is bad? Am I able to rebuild the RAID if I can find which drive is causing problems? Do I need to have the drive mounted to a computer for it to rebuild or will it do it with just the hardware?

Any help or suggestions would be greatly appreciated, I'm desperate!

Thanks

J.C.
JCReifenberg
 
Posts: 1
Joined: August 27th, 2015, 11:57 am

Re: HFR2-SU3S2FW ProRaid 4 Bay - ERROR

Postby Admin_Mediasonic » September 1st, 2015, 2:17 pm

if you are using regular desktop drives which are only good for Raid 0 , 1 and 10
then you got Raid array corruption
you can try using disk drill http://www.cleverfiles.com/?gclid=CMG-l ... aQodVl4B9A
to repair
if does not work, then create a new Raid 5 array using existing drive but do not format it. Then use disk drill to recover data
Admin_Mediasonic
Site Admin
 
Posts: 1752
Joined: January 28th, 2010, 3:29 pm


Return to HFR2-SU3S2 ProRaid - For Mac Users

Who is online

Users browsing this forum: No registered users and 2 guests