Raidpro HFR2-SU3S2 model error and rebuild light simultaneou

Support and Discussion for HFR2-SU3S2 ProRaid - For PC Users

Raidpro HFR2-SU3S2 model error and rebuild light simultaneou

Postby keikung » June 3rd, 2016, 5:11 am

My raidpro error and rebuild light were light on simultaneously. How can I know which drive should be replaced and which is rebuilt?

The video were on below link.
https://youtu.be/y8sV6zStZcI
keikung
 
Posts: 4
Joined: June 3rd, 2016, 5:00 am

Re: Raidpro HFR2-SU3S2 model error and rebuild light simulta

Postby Admin_Mediasonic » June 3rd, 2016, 9:48 pm

which model of hard drives are you using?
the vide shows 2 red LED flashing beside 2 hard drives.
it could be Raid array corruption.
if 2 drives are bad, it won't rebuild successfully
you will have to use data recovery software
try Disk Drill for Mac
Admin_Mediasonic
Site Admin
 
Posts: 1752
Joined: January 28th, 2010, 3:29 pm

Re: Raidpro HFR2-SU3S2 model error and rebuild light simulta

Postby keikung » June 4th, 2016, 10:16 am

I use the WD Green 3TB. My mac still can see the raidpro drive and it can work normally.
What should I do to resolve the problem.
keikung
 
Posts: 4
Joined: June 3rd, 2016, 5:00 am

Re: Raidpro HFR2-SU3S2 model error and rebuild light simulta

Postby keikung » June 4th, 2016, 9:55 pm

Admin_Mediasonic wrote:which model of hard drives are you using?
the vide shows 2 red LED flashing beside 2 hard drives.
it could be Raid array corruption.
if 2 drives are bad, it won't rebuild successfully
you will have to use data recovery software
try Disk Drill for Mac


I use the WD Green 3TB. My mac still can see the raidpro drive and it can work normally.
What should I do to resolve the problem.
keikung
 
Posts: 4
Joined: June 3rd, 2016, 5:00 am

Re: Raidpro HFR2-SU3S2 model error and rebuild light simulta

Postby Admin_Mediasonic » June 5th, 2016, 1:59 am

WD green are just regular desktop drives, they are good for Raid 0, 1 or 10
for Raid 5, you should use drives rated for Raid 5

If you have access to your data, back it up. Do a back up, just in case you loose access
after you data is backed up

check which drive has problem (if any)
Admin_Mediasonic
Site Admin
 
Posts: 1752
Joined: January 28th, 2010, 3:29 pm

Re: Raidpro HFR2-SU3S2 model error and rebuild light simulta

Postby keikung » June 5th, 2016, 2:59 am

Admin_Mediasonic wrote:WD green are just regular desktop drives, they are good for Raid 0, 1 or 10
for Raid 5, you should use drives rated for Raid 5

If you have access to your data, back it up. Do a back up, just in case you loose access
after you data is backed up

check which drive has problem (if any)


How can I check which drive has problem because the 3rd and 4th drives were blinked. I think one drive was error and another was rebuilt but I don't know which is the error drive.
keikung
 
Posts: 4
Joined: June 3rd, 2016, 5:00 am

Re: Raidpro HFR2-SU3S2 model error and rebuild light simulta

Postby Admin_Mediasonic » June 8th, 2016, 1:13 pm

you can install this http://binaryfruit.com/drivedx/usb-drive-support
and check the SMART INFO, see if any errors
Admin_Mediasonic
Site Admin
 
Posts: 1752
Joined: January 28th, 2010, 3:29 pm


Return to HFR2-SU3S2 ProRaid - For Mac Users

Who is online

Users browsing this forum: No registered users and 1 guest