Firewire firmware for HFR2-SU3S2FW For MAC Computers only

Support and Discussion for HFR2-SU3S2 ProRaid - For PC Users

Firewire firmware for HFR2-SU3S2FW For MAC Computers only

Postby Admin_Mediasonic » April 10th, 2012, 6:03 pm

If you are using a Mac with HFR2-SU3S2FW connected by Firewire and having disconnecting issue
please update the firewire firmware.



Update instructions:

1. Donwload the above update utility
2. Install it
3. When finish installing, it will ask to reboot your computer.
4. After rebooting, connect your HFR2-SU3S2FW to the firewire port on your MAC and turn the enclosure on
5. Run the Jmicron JMB355 tool located under Applications
6. You should see this
Screen Shot 2012-07-24 at 5.01.52 PM.png
Screen Shot 2012-07-24 at 5.01.52 PM.png (64.57 KiB) Viewed 17705 times

7. Click on Continue and let it update.
8. When is done, click on exit and turn off the enclosure
9. Turn enclosure back on
10. You are done, you may delete the Jmicron JBM355 tool from your Applications

*** NOTE:
If you run this tool and days " The Device already updated" that means your enclosure already came with this firmware.
Admin_Mediasonic
Site Admin
 
Posts: 1752
Joined: January 28th, 2010, 3:29 pm

Return to HFR2-SU3S2 ProRaid - For Mac Users

Who is online

Users browsing this forum: No registered users and 1 guest