Raid 50 Write Speed issue - Fix

Support and Discussion for H8R2-SU3S2 ProRaid - For PC Users

Re: Raid 50 Write Speed issue - Fix

Postby Admin_Mediasonic » May 10th, 2013, 10:04 am

if you have 8 hard drives, then just create a Raid (2x10) with 8 hard drives

then open Jmicron Raid manager and you select Controller 1 and press Advance Mode
Capture3.JPG
Capture3.JPG (137.77 KiB) Viewed 5836 times


Then in Advance mode, you should see Controller 1: Firmware Information
click on browse to load the firmware and then click update
Capture1.JPG
Capture1.JPG (109.22 KiB) Viewed 5836 times


When done with controller 1, go back to basic mode, and now select controller 2
and go to advance mode again and to the update
Capture2.JPG
Capture2.JPG (73.48 KiB) Viewed 5836 times


when done both controller 1 & 2 will have the firmware version V.0959
turn off enclosure and turn it back on
Admin_Mediasonic
Site Admin
 
Posts: 1721
Joined: January 28th, 2010, 3:29 pm

Return to H8R2-SU3S2 ProRaid - For PC Users

Who is online

Users browsing this forum: No registered users and 1 guest