8 Bay H8R2-SU3S2, Raid 0/5/50/10, USB 3.0 & eSata

Support and Discussion for H8R2-SU3S2 ProRaid - For PC Users

8 Bay H8R2-SU3S2, Raid 0/5/50/10, USB 3.0 & eSata

Postby Admin_Mediasonic » August 11th, 2011, 11:25 am

Model: H8R2-SU3S2

8 Bay H8R2-SU3S2, Raid 0/5/50/10, USB 3.0 & eSata

*note: 8 Bay does not support Windows XP

H8R2-SU3S2_Box Front.JPG
H8R2-SU3S2_Box Front.JPG (65.52 KiB) Viewed 8325 times

H8R2-SU3S2_Specs.JPG
H8R2-SU3S2_Specs.JPG (72.97 KiB) Viewed 8325 times


H8R2-SU3S2_Raid0.JPG
H8R2-SU3S2_Raid0.JPG (38.76 KiB) Viewed 8325 times

H8R2-SU3S2_Raid_0.JPG
H8R2-SU3S2_Raid_0.JPG (43.43 KiB) Viewed 8325 times

H8R2-SU3S2_Raid5_50.JPG
H8R2-SU3S2_Raid5_50.JPG (66.88 KiB) Viewed 8325 times

H8R2-SU3S2_Raid10.JPG
H8R2-SU3S2_Raid10.JPG (24.53 KiB) Viewed 8325 times
H8R2-SU3S2_Front.JPG
H8R2-SU3S2_Front.JPG (36.26 KiB) Viewed 8325 times
H8R2-SU3S2_Open Front.JPG
H8R2-SU3S2_Open Front.JPG (43.02 KiB) Viewed 8325 times
H8R2-SU3S2_Back.JPG
H8R2-SU3S2_Back.JPG (34.88 KiB) Viewed 8325 times
H8R2-SU3S2_Package.JPG
H8R2-SU3S2_Package.JPG (61.18 KiB) Viewed 8325 times
Admin_Mediasonic
Site Admin
 
Posts: 1752
Joined: January 28th, 2010, 3:29 pm

Set up Info

Postby Admin_Mediasonic » September 5th, 2011, 1:58 am

After you installed the hard drives

Make sure 8 Bay is connected to a computer that is turned on
Power on the device and press Mode button on the front of the unit for 3 seconds until LED flashes. Press it again to select the RAID mode you want then press the Confirmation button on the back panel until the device shuts down. Power on the device again and the RAID mode set-up is completed.
Admin_Mediasonic
Site Admin
 
Posts: 1752
Joined: January 28th, 2010, 3:29 pm


Return to H8R2-SU3S2 ProRaid - For PC Users

Who is online

Users browsing this forum: No registered users and 1 guest