8 Bay H8R2-SU3S2, Raid 0/5/50/10, USB 3.0 & eSata

[Admin_Mediasonic]

Model: H8R2-SU3S2

8 Bay H8R2-SU3S2, Raid 0/2xRaid5/50/10, USB 3.0 & eSata

*note: 8 Bay does not support Windows XP

H8R2-SU3S2_Box Front.JPG (65.52 KiB) Viewed 8217 times

H8R2-SU3S2_Specs.JPG (72.97 KiB) Viewed 8217 times

H8R2-SU3S2_Raid0.JPG (38.76 KiB) Viewed 8217 times

H8R2-SU3S2_Raid_0.JPG (43.43 KiB) Viewed 8217 times

H8R2-SU3S2_Raid5_50.JPG (66.88 KiB) Viewed 8217 times

H8R2-SU3S2_Raid10.JPG (24.53 KiB) Viewed 8217 times

H8R2-SU3S2_Front.JPG (36.26 KiB) Viewed 8217 times

H8R2-SU3S2_Open Front.JPG (43.02 KiB) Viewed 8217 times

H8R2-SU3S2_Back.JPG (34.88 KiB) Viewed 8217 times

H8R2-SU3S2_Package.JPG (61.18 KiB) Viewed 8217 times

[Admin_Mediasonic]

After you installed the hard drives

Make sure 8 Bay is connected to a computer that is turned on
Power on the device and press Mode button on the front of the unit for 3 seconds until LED flashes. Press it again to select the RAID mode you want then press the Confirmation button on the back panel until the device shuts down. Power on the device again and the RAID mode set-up is completed.