Page 1 of 1

8 Bay H8R2-SU3S2, Raid 0/5/50/10, USB 3.0 & eSata

PostPosted: August 11th, 2011, 11:25 am
by Admin_Mediasonic
Model: H8R2-SU3S2

8 Bay H8R2-SU3S2, Raid 0/2xRaid5/50/10, USB 3.0 & eSata

*note: 8 Bay does not support Windows XP

H8R2-SU3S2_Box Front.JPG
H8R2-SU3S2_Box Front.JPG (65.52 KiB) Viewed 8292 times

H8R2-SU3S2_Specs.JPG
H8R2-SU3S2_Specs.JPG (72.97 KiB) Viewed 8292 times


H8R2-SU3S2_Raid0.JPG
H8R2-SU3S2_Raid0.JPG (38.76 KiB) Viewed 8292 times

H8R2-SU3S2_Raid_0.JPG
H8R2-SU3S2_Raid_0.JPG (43.43 KiB) Viewed 8292 times

H8R2-SU3S2_Raid5_50.JPG
H8R2-SU3S2_Raid5_50.JPG (66.88 KiB) Viewed 8292 times

H8R2-SU3S2_Raid10.JPG
H8R2-SU3S2_Raid10.JPG (24.53 KiB) Viewed 8292 times
H8R2-SU3S2_Front.JPG
H8R2-SU3S2_Front.JPG (36.26 KiB) Viewed 8292 times
H8R2-SU3S2_Open Front.JPG
H8R2-SU3S2_Open Front.JPG (43.02 KiB) Viewed 8292 times
H8R2-SU3S2_Back.JPG
H8R2-SU3S2_Back.JPG (34.88 KiB) Viewed 8292 times
H8R2-SU3S2_Package.JPG
H8R2-SU3S2_Package.JPG (61.18 KiB) Viewed 8292 times

Set up Info

PostPosted: September 5th, 2011, 1:58 am
by Admin_Mediasonic
After you installed the hard drives

Make sure 8 Bay is connected to a computer that is turned on
Power on the device and press Mode button on the front of the unit for 3 seconds until LED flashes. Press it again to select the RAID mode you want then press the Confirmation button on the back panel until the device shuts down. Power on the device again and the RAID mode set-up is completed.