Page 1 of 1

Not compatible with Hard drives with *Power Disable Feature*

Posted: December 19th, 2018, 3:28 pm
by Admin_Mediasonic
Mediasonic Enclosures are not compatible with hard drives with Power Disable Feature*
see: ... le-pin.pdf

(*however it will work with a slight workaround) (If you put some tape on the pin 3 on the hard drive, Then it will work with the enclosure)

see: ... el-Disks-/
HGST.JPG (96.31 KiB) Viewed 3211 times