Can't recognize the partition correctly

Support and Discussion for HUD1-SU3 CloneHD - For PC Users

Can't recognize the partition correctly

Postby lb2017 » September 24th, 2017, 10:35 pm

1) Model of the Enclosure: HUD1-SU3 CloneHD
2) Date and place of Purchase: Sep 20, 2017
3) Operating System used: Windows 10
4) Model / Brand and how many Hard Drives used: 2 x WD Red 4TB WD40EFRX
5) If Raid enclosure, what Raid mode being used: NA
6) What is the issue you are having:
One of the drive has no problem at all, the second drive has a 3.9TB partition (GPT) same as the other one. But showing up as a 2TB partition with the mediasonic docking station under the Disk Management Tool, the rest of the space is shown as unallocated space. Tried on other docking station and there is no problem. Also, not able to delete or change the partition information with Disk Management Tool.

Thank you!
lb2017
 
Posts: 2
Joined: September 24th, 2017, 10:08 pm

Re: Can't recognize the partition correctly

Postby Admin_Mediasonic » October 2nd, 2017, 7:02 pm

for that hard drive you need to use Diskpart to clean the drive and you can reformat it
see http://knowledge.seagate.com/articles/e ... uage=en_US

use above procedure to clean drive
Admin_Mediasonic
Site Admin
 
Posts: 1712
Joined: January 28th, 2010, 3:29 pm

Re: Can't recognize the partition correctly

Postby lb2017 » October 5th, 2017, 10:00 pm

Thank you, that solved the problem!
lb2017
 
Posts: 2
Joined: September 24th, 2017, 10:08 pm


Return to HUD1-SU3 CloneHD - For PC Users

Who is online

Users browsing this forum: No registered users and 2 guests