Page 1 of 1

HUR6-SU31 / USB 3.1 Gen-II / Type-C

PostPosted: February 1st, 2017, 4:37 pm
by Admin_Mediasonic
Mediasonic ProRaid 2 Bay 2.5' SATA HDD / SSD Enclosure - USB 3.1 Gen-II Type-C
Model# HUR6-SU31
HUR6-SU31_Box.jpg (53.81 KiB) Viewed 2771 times

Hardware Embedded Raid Controller to ensure data integrity with redundant back up capability (Raid 1)
• Support Raid 0 / 1 Mode, JBOD Mode, and Single Disk Mode
• Support up to 2 x 2TB 2.5" SATA HDD / SSD (7mm / 9.5mm)
• Support all brand of 2.5" SATA I / II / III hard drive / SSD (7mm / 9.5mm) up to 2TB per drive
• Support USB 3.1 Gen-II 10 Gbps transfer rate, and Universal Attached SCSI Protocol (UASP), and backward compatible with USB 3.0 / 2.0
• Smart RAID switcher support for fast and easy RAID mode setting
• Smart Power Sync support PC and Mac
• LED light indicator for system status monitoring
• Model Number: HUR6-SU31
• UPC Code: 629329001835
Raid Mode Features: • Raid 0 (Stripping Mode): Two hard drives will show up as one large single drive but speed performance will boost up. The two hard drive will write data in "column" effect. This form of array splits each piece of data across both hard drive in segments. Data is stored between first hard drive and second hard drive. Raid 0 does not provide any redundancy, if one hard drive fail, all data is lost.
• Raid 1 (Mirroring Mode): Using this mode will require two identical hard drives. It will creates an extra copy (or mirror) set of data to second drive. The back up are more important for safe keeping and the available data only show up in one large single drive.
• JBOD Mode: Raid 0 Spanning mode. Two hard drive will show up as one large single drive. Spanning is an array (not Raid) that is written sequentially across two drives.
• Single Disk Mode: Computer will show up as two independent drives.

HUR6-SU31_A.jpg (275.71 KiB) Viewed 2770 times

HUR6-SU31_B.jpg (317.31 KiB) Viewed 2770 times

HUR6-SU31_C.jpg (132.41 KiB) Viewed 2770 times