Driver not working on Windows 10 Pro 64-bit

Support and Discussion for HP1-SS3

Driver not working on Windows 10 Pro 64-bit

Postby BEIT » November 12th, 2017, 9:27 pm

Hi there,
I have bought this card to use the Multi-Port eSata for one of the MediaSonic cases (usb 2.0).

Drives install fine and when I switch the box to eSata then the port multiplier works and I see all 4 installed HDDs. But then about every 15 minutes the following bugcheck error is received and the pc reboots (HP Z600 workstation). Switching back to usb 2.0 even with the driver installed resolves the issue. Of course then I'm not getting to use the eSata. I did install v3.2.1 driver from this forum.

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xffffe78adde4a060, 0xfffff801f9e77a30, 0xffffe78adddbeb40). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 6bb1158c-54ca-46af-b6b8-0be06ed0d801.
Posts: 1
Joined: November 12th, 2017, 9:14 pm

Return to Mediasonic eSata III PCIe card HP1-SS3

Who is online

Users browsing this forum: No registered users and 1 guest