Mediasonic eSata III PCIe card HP1-SS3

Support and Discussion for HP1-SS3

Mediasonic eSata III PCIe card HP1-SS3

Postby Admin_Mediasonic » October 1st, 2012, 12:22 pm

Mediasonic eSata III PCIe card HP1-SS3
Compatible with Mediasonic 4 bay Enclosures
* Note: Enclosures' eSata are still on SATA II Speed only.

For Drivers check viewtopic.php?f=33&t=1494

HP1-SS3.jpg (74.91 KiB) Viewed 14139 times

ASMEDIA-asm1061 chipset
2 x eSATA Port - Transfer rate up to 6.0 Gbps
Support Port Multiplier and FIS-Based switch
Support up to 8 hard drive
PCI Express Base Secification Rev 2.0
PCI Express Card Electromechanical Rev 2.0
Serial ATA AHCI Spec. Rev 1.3
Serial ATA Revision 3.0
One lan PCI Express for 2.5 and 5.0 Ghz signaling
Single vitrual Channel
SSC support
ECRC and Advnced Error Reporting Capability
2 ports Serial ATA PHY for 1.5, 3.0 and 6.0 GHz signaling
Support IDE/AHCI mode
Support Native Command Queue (NCQ)
Support Gen1m and Gen2m SATA PHY
Site Admin
Posts: 1795
Joined: January 28th, 2010, 3:29 pm

Return to Mediasonic eSata III PCIe card HP1-SS3

Who is online

Users browsing this forum: No registered users and 1 guest