Installed HP1-SS3 and Pro-Box 4 Bay HF@-SU3S2 and they do no

Support and Discussion for HP1-SS3
Post Reply
Atticat
Posts: 1
Joined: January 7th, 2016, 1:55 pm

Installed HP1-SS3 and Pro-Box 4 Bay HF@-SU3S2 and they do no

Post by Atticat »

Installed HP1-SS3 and Pro-Box 4 Bay HF@-SU3S2 and they do not see each other
I have installed the drivers for the HP1-SS3 as instructed and the esata controller shows up without error in Device management as Asmedia 106x SATA Controller
I hook up the ProBox 4 bay to the supplied esata cable connect it to the esata card, reboot everything and the pro box is not detected, tried different esata cable. The Pro Box does not even see it is hooked to an esata device (source light for esata never activates). Note, the pro box works fine with USB 3 on same machine.
Windows 10, 64 bit, ASUS mother board. tons of system resources

Any help out there?

Atticat

Admin_Mediasonic
Site Admin
Posts: 1818
Joined: January 28th, 2010, 2:29 pm

Re: Installed HP1-SS3 and Pro-Box 4 Bay HF@-SU3S2 and they d

Post by Admin_Mediasonic »

you did switch HF2-SU3S2 to eSata interface right? (holding the interface button)

Post Reply

Return to “Mediasonic eSata III PCIe card HP1-SS3”