Revised Raid Set up Procedure

Support and Discussion for HUR1-SU3S2

Revised Raid Set up Procedure

Postby Admin_Mediasonic » October 28th, 2010, 12:37 pm

We notice that the raid set up instruction on the manual is wrong, so here is the update
in the manual you see:
HUR1-SU3S2_raid.JPG
HUR1-SU3S2_raid.JPG (25.17 KiB) Viewed 6961 times
. Ignore the above procedure


Revised manual can be downloaded from here http://support.mediasonicinc.com/HUR1-S ... l_revc.pdf

the correct procedure is:

1) Set the DIP switch to the desire Raid you want to use
2) Press and hold the Raid Confirmation button (next to the DIP switch)
3) While holding on the Raid confirmation button, press the power on button and wait until the Raid mode LED you selected light to light up. Once is up you can release the confirmation button.
HUR1-SU3S2_0.JPG
HUR1-SU3S2_0.JPG (60.25 KiB) Viewed 6961 times
HUR1-SU3S2_01.JPG
HUR1-SU3S2_01.JPG (36.64 KiB) Viewed 6961 times
Admin_Mediasonic
Site Admin
 
Posts: 1745
Joined: January 28th, 2010, 3:29 pm

Return to HUR1-SU3S2 Dual Bay ** Discontinued **

Who is online

Users browsing this forum: No registered users and 1 guest