Problem with driver

Support and Discussion for HP1-U32F

Problem with driver

Postby burnabytom » February 5th, 2015, 9:33 pm

I have installed my card and it seems that the USB ports on the back are not working.
the control panel device manager shows that the Fresco Logic xHCI (USB3) Controller FL1100 Series is OK but the Fresco Logic xHCI (USB3) Root hub shows a warning triangle. When I look a the properties, it shows the message:
This device is not working properly because Windows cannot load the drivers required for this device (Code 31).
The driver shows up as Fresco Logic 05/01/2015 Driver version 3.6.4.0
Any ideas on how to fix?
burnabytom
 
Posts: 1
Joined: February 5th, 2015, 9:26 pm

Re: Problem with driver

Postby Admin_Mediasonic » March 10th, 2015, 10:04 am

please check that you did plug in the power to the card
Admin_Mediasonic
Site Admin
 
Posts: 1750
Joined: January 28th, 2010, 3:29 pm


Return to Mediasonic HP1-U32F, PCI-E USB 3.0 Card

Who is online

Users browsing this forum: No registered users and 1 guest