new disks and unit won't stay powered on

Support and Discussion for HFR2-SU3S2 ProRaid - For PC Users
Admin_Mediasonic
Site Admin
Posts: 1817
Joined: January 28th, 2010, 2:29 pm

Re: new disks and unit won't stay powered on

Post by Admin_Mediasonic »

try with 2 drives slot 1 and 2 (A&B)
set to Raid 0 stripping. See if it works
if ok, then remove the 2 drives and put other 2 (C&D) and to the same, sent to Raid 0

then try A&C
and B&D
does all combination work? in Raid 0?

springs
Posts: 7
Joined: October 22nd, 2014, 2:35 pm

Re: new disks and unit won't stay powered on

Post by springs »

hi, i eventually got it responding to a new raid array but was running incredibly slow at responding. I've just swapped the drives out with another set to test and the same issue is happening where the unit will power up and then suddenly turn off with the H+ error.

It appears that the issue must be the device and in some way must be faulty. It's a shame that it's out of warranty.

Admin_Mediasonic
Site Admin
Posts: 1817
Joined: January 28th, 2010, 2:29 pm

Re: new disks and unit won't stay powered on

Post by Admin_Mediasonic »

you should check your drives SMART info
if you haven't to see if there are any errors in them

Post Reply

Return to “HFR2-SU3S2 ProRaid - For PC Users”