Hard drive no longer recognized?

Support and Discussion for Homeworx HW130STB and HW180STB
Post Reply
msteel
Posts: 1
Joined: January 19th, 2017, 12:56 pm

Hard drive no longer recognized?

Post by msteel »

The hard drive I have been using with my HW180STB suddenly stopped being recognized by the STB. However, if I connect the drive to my Windows 7 machine it works there. A couple of other devices (flash drive and another HDD) are recognized by the STB so it is a bit puzzling. It seems just these two devices no longer work together although they work separately. Anything I should try before I give up on the drive?

The drive is an old PATA in a USB 2.0/FireWire enclosure with an external power supply, 250 GB capacity, formatted NTFS. I have tried different power supply, cable, restarting the STB, etc.

The STB becomes sluggish when this particular drive is connected (takes 3-4 seconds to respond to remote control button presses)

Mooncalf2012
Posts: 3
Joined: May 14th, 2018, 9:26 pm

Re: Hard drive no longer recognized?

Post by Mooncalf2012 »

Have you formatted using the USB menu, or from Windows? I've noticed that drives not formatted with the USB menu 'Format' command do not work, unless you label the drive/partition as: 123456789 (The default name given to formatted drives.) Hope this helps.

thesavo
Posts: 9
Joined: July 28th, 2016, 10:14 pm

Re: Hard drive no longer recognized?

Post by thesavo »

Addionally, after formating you can run a disk check on the drive.

This pictorial should show you.

http://www.ilovefreesoftware.com/06/win ... ws-10.html

If you want to go a step further, you can use a bootable program called spinrite.

Post Reply

Return to “HomeWorx HW130STB and HW180STB ATSC Digital Converter Box with Media Player Function & HDMI”