Power On After Power Fail

Support and Discussion for H82-SU3S2 ProBox - For PC Users

Power On After Power Fail

Postby bblboy54 » March 10th, 2018, 2:05 pm


I have been using this enclosure as well as 3 of your 4-bay version (one is a startech branded but obviously the same device) and they all have been very good to me but I continue to have one major frustration that I'm hoping there is some solution for. My server is on a UPS but there have been a couple different times when I've been out of state that there has been an extended power outage at my house which has depleted my UPS battery resulting in the power to the enclosures going out.... The problem is that when the power comes back on the server starts to boot but then can't mount it's storage drives because all of these enclosures do not power back on by themselves and my server remains down until I can get back into town and press the power buttons.
Posts: 1
Joined: March 10th, 2018, 1:59 pm

Re: Power On After Power Fail

Postby canon1230 » March 29th, 2018, 10:36 am

I too have this problem. Is there a way to set the enclosures to restart or resume after a power failure?
Posts: 1
Joined: November 15th, 2017, 4:41 pm

Re: Power On After Power Fail

Postby Admin_Mediasonic » March 31st, 2018, 11:14 pm

the 4 bay and 8 bays will not power back on when powers goes out

one possible solution is to connect the enclosure to a back up Power UPS by its own
because it needs a little bit of power to keep the enclosure in sleep mode.
when power is cut off, the enclosure then completely turns off.
Site Admin
Posts: 1807
Joined: January 28th, 2010, 3:29 pm

Return to H82-SU3S2 ProBox - For PC Users

Who is online

Users browsing this forum: No registered users and 0 guests